AMD Direct mounting accessories
DESCRIPTION
This is an accessories system that allows the direct mount of the transmitter on the primary element. The direct mounting system consists of the following basic elements:
- CE Stabilized Connector: It gives a rigid connection of the manifold or adapter with the orifice plate, increasing considerably the flexion strength in the whole kit. It has a 3/8” orifice and it is totally made of AISI 316 stainless steel. The kit is completed with NF 7/16” mounting bolts and PTFE seals.
- AA Right Angle Mount: It is designed to provide a 90% change in the measuring line. lt is supplied with 2 block valves. lt has 3/8” orifice and two 1/4” NPT lower purge ports.
- PAT Perpendicular Coplanar Adapter: It is designed to mount 2 differential pressure transmitters in bidirectioal flow applications or when two measurement instruments are needed to custody transfer applications.
CHARACTERISTICS
• Improve the performance of M6 manifolds.
• Eliminating long impulse lines.
• Full bore porting and without diameter changes.
• An improvement in the transmitter performance before pulsant flows.
• A reduction in freezing, leakages problems etc. in the instrument connections.
Datasheet
